Vauhti HF Wet Kõrgfluoriga Vedel Kiirmääree +10°...-1°C, 80ml

HF WET is an excellent choice for base wax under fluorocarbon coatings in wet conditions. Suitable in mild winter condition, on old and coarse snow down to -3°C as long as there is high humidity in snow.
The series is intended specifically for competitive skiers and demanding fitness skiers. 
High fluorocarbon content provides for supreme water and dirt repellence. 
The entire line is suitable for all snow types, if the air humidity is over 55% and snow is humid or wet. 
The content of these products is the same as their predecessor Vauhti HF-gliders.

Instructions for quick glides:
• Shake the bottle well.
• Press the sponge against the ski base and squeeze the bottle lightly, which makes the bottle valve open and the product can trickle onto the sponge.
• Apply a thick layer by rubbing it back and forth on the gliding surfaces.
• Allow to dry for approximately 10 min.
• Brush thoroughly, using a nylon brush.

Tips to improve the durability and glide sensitivity:
Tip 1.  Attach the dried product by rubbing with natural cork, you can also use a cork roller (= Roto cork).  Using cork will significantly improve the product’s durability. Brush the ski base thoroughly with a nylon brush; if necessary, use a fine-bristled metal brush first.
Tip 2.  Add Vauhti Fluorocarbon Block on ski base waxed with Quick Glide. Rub with natural cork or Roto cork, and brush thoroughly, using a nylon brush. The glide sensitivity of the ski will increase significantly.
Tip 3.  Rub a layer of Vauhti Fluorocarbon Block on the base, and apply a generous amount of quick glide on top of this layer, mixing the two products into one ”porridge”. Let dry completely; the longer, the better. Brush heavily, using a nylon brush. You can also extend durability by rubbing the “porridge” with a natural cork or a cork roller. Brush thoroughly with a nylon brush; if necessary, use a fine-bristled metal brush first.