Start FHF50 Universal Fluoro Klister +10...-5°C, 55g

New Start FHF line is a functional fluorinated kick wax line. Suitable for use as kick wax alone, or as a finishing wax applied on top of kick wax.

Temperature: +10...-5°C
Packaging: 0.055 kg
Unit: tk
Laos
SKU
01893
Soodushind 13,50 € Tavahind 18,00 €
START

Tasuta kohaletoimetamine alates 200€

Tarneaeg
Eesti - 0-3 tööpäeva
Soome, Rootsi, Läti, Leedu - 2–4 tööpäeva
Puhka Euroopat - 4–7 tööpäeva
Šveits, Norra - 7-10 tööpäeva
USA, Kanada - 10-15 tööpäeva
Loe rohkem...

30 päevane tagastamisõigus
Loe rohkem...

New Start FHF line is a functional fluorinated kick wax line. Suitable for use as kick wax alone, or as a finishing wax applied on top of kick wax.

Waxing with klisters:

1. Clean the grip zone with ski wax remover liquid. When using klisters, the grip zone is generally shorter than when using hard waxes (30 – 50cm).

2. Abrade the grip zone with 80 – 120 grit sandpaper.

3. Warm the klister in it’s tube with a hot air gun, hairdryer or hot water. Warm klister is softer and easier to apply in an even layer.

4. Squeeze klister onto the grip zone, on both sides of the groove approximately every 5 centimetres.

5. Spread the klister with your thumb, hand or with a cork to an even layer.

6. Clean any excess klister from the groove and sidewalls of the ski.

7. Allow the skis to cool outside before skiing.

Note! Finished klister waxing should not be touched with your hands.

Lisainfo
Temperature+10...-5°C
Write Your Own Review
Arvustatav toode:Start FHF50 Universal Fluoro Klister +10...-5°C, 55g
Sinu hinnang